Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Water/Oil/Liquid bath temperature calibration/testing system, Control HMI touch screen, Option of External circulation
Internal Volumes(L): 4
Dimension
Workspace dimension (mm): 140x100x100 (WxDxH)
Outer Dimension (mm): 350x600x750 (WxDxH)
Temperature
Temperature range: -30°C to 100°C @25°C
Temperature fluctuation: ±0.08°C
Temperature uniformity: ±0.1°C
Cooling Medium for -30°C: 4 liter Isopropyl Alcohol / Ethanol
Heating Medium for +100°C: 4 liter Water/ Silicon Oil (5 to 10Cst)
Heating Medium for +200°C: 4 liter Silicon Oil (5 to 10Cst)
Cooling time: 25°C to -30°C: 60 minutes (Isopropyl Alcohol)
Internal Material: Internal test chamber is manufactured with Stainless steel
External Material: Exterior material shall be made of MS with powder coated panels/door with impressive precision & aesthetics
Thermal Insulation: Internal test chamber and outer body is isolated using mineral wool ensuring no air pockets and zero conduction and heat losses
Circulation Pump: light weight high flow Circulation pump for uniform circulation
Refrigeration Compressor: Huayi, Emerson Tecumseh and Danfoss.
Refrigerant: R134a or R-404a
Cooling mode: Air-Cooled
Evaporator: Evaporator heat exchanger coils
Heater: Inconel material sheathed/ bare nichrome air heaters to achieve the set temperature.
Controller: 3” Omron(HMI)
Power Supply Requirment: 230VAC +/- 5%, 1 Phase 50 Hz, 2 wire + E.
Connected Load (Max): 2KW
Chamber Drain: 1/4" BSP Female Threaded provision (Gravity Drain)
Condenser: Standard: Air-cooled condenser
Max Noise Level (dbA) Measured @1 metre distance: 10
Ambient Condition: 15°C to 25°C and 10% RH to 90% RH for air cooled system
Note-Circulation Tube Available for Cooling of External Pump like Experimental Test(Viscometer etc.)
