TSI 8130A Automated Filter Tester (DOP/ NaCl; 50 — 200 mg/m3 / 12 – 25 mg/m3)

Aerosol Type: DOP/ NaCl

Generator Model: 1081414R / 8118A

Count Median Diameter (CMD): 0.185 µm ± 0.02 / 0.075 µm ± 0.02

Mass Mean Diameter (MMD): 0.33 µm / 0.26 µm

Geometric Std. Deviation (GSD): ≤ 1.6 / ≤ 1.86

Concentration: 50 — 200 mg/m3 / 12 – 25 mg/m3

Ambient Pressure: 75 to 110 kPa (absolute)

Ambient Temperature: 10°C to 35°C

Operating Humidity: 0% to 95%, non-condensing

Technique: Light-scattering, laser photometer

Dynamic Range: 1.0 µg/m3 to >200 mg/m3

Volumetric Flow: TSI Mass Flow Meter 4045 (pressure/temp compensated)

Flow Rate through Media: Adjustable from 10 to 110 L/min

Accuracy: ±2% of reading

Technique: Electronic pressure transducer

Range: 0 to 250 mm H2O (0 to 2500 Pa)

Accuracy: ±1% of full scale

Operating Range: Measures particle penetrations up to 99.9999%

Note: Sensitivity for salt aerosol is less than oil at 200 mg/m3

Power: 90 VAC to 250 VAC, 50 Hz to 60 Hz, 5.5 A continuous

Compressed Air: 80 psig, 7 scfm (550 kPa, 198 std. L/min)

Dimensions (L x W x H): 70 cm x 70 cm x 147 cm (28 in. x 28 in. x 58 in.)

Weight: 150 kg (330 lb)

Display/Output: Color touch screen, RS-232

Built-in Internal Pump: Included (Vacuum pump)

Filter Holder: Included for flat sheet media and gravimetric filter holder

Datasheet