Transcom T5231A Vector Network Handheld Analyzer (300 kHz - 3.0 GHz) | EMIN.CO.TH

Transcom T5231A Vector Network Handheld Analyzer (300 kHz - 3.0 GHz)

Name: Transcom T5231A Vector Network Handheld Analyzer (300 kHz - 3.0 GHz)
Brand: TRANSCOM

ManufacturerTRANSCOM(View more products from this manufacturer)

ModelT5231A (300 kHz - 3.0 GHz)

Contact

Quantity

Secure Checkout

Quality Engagement

Easy change and return

Delivery Available

Material:
Size:

Key Features

T5231A is a high performance hand held VNA, large frequency range, large dynamic range, low Noise level, low trace noise, it can be widely used for microwave device measurement in wireless communication, broadcast, TV device, radar device and semiconductor.

Large frequency range: 300kHz to 3.0GHz
Large dynamic range: >125dB (IFBW=10Hz), 130dB typ.
Low noise level: <-120dbm ifbw="10Hz)</li">
Low trace noise: 1mdB rms (IFBW=3kHz)
High measurement speed: 125μs/point (IFBW=30kHz)
High effective directivity: >45dB
Remote Control: LAN/GPIB/USB
Very low power consumption
“One-key-test” solution

Manufacture: Transcom

Measurement Range
Impedance	50Ω or 75Ω
Test port connector	N-type, female
Number of test ports	2
Frequency range	300kHz to 3GHz
Full CW frequency accuracy	±5×10^-6
Frequency resolution	1Hz
Number of measurement points	2 to 10001
Measurement bandwidths	1Hz to 30kHz (with 1/1.5/2/3/5/7 steps)
Dynamic range (IF bandwidth 10 Hz)	125dB, typ.130dB
Measurement Speed
Measurement time per point	125μs
Source to receiver port switchover time	＜10ms
Typical cycle time versus number of measurement points
Number of points (IFBW 30kHz)	51	201	401	1601
Uncorrected (Start 300 kHz, stop 10 MHz)	13ms	52ms	104ms	413ms
Full two-port calibration (Start 300 kHz, stop 10 MHz)	46ms	123ms	226ms	844ms
Uncorrected (Start 10 MHz, stop 3 GHz)	7ms	27ms	53ms	207ms
Full two-port calibration (Start 10 MHz, stop 3 GHz)	34ms	73ms	125ms	434ms
Manufacturer	Transcom