Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
DISCONTINUED PRODUCT, REPLACEMENT MODEL: MM-41DP
Measuring Method: AC two-electrode method
Display: Custom LCD
Meas. Range:
[If standard cell is used] Electrical conductivity: 0.1mS/m-10S/m
Electrical resistivity: 0.1Ω・m-10kΩ・m
Salinity (NaCl equivalent from electrical conductivity): 0-4.00%
Temperature: 0-80.0℃
[If cell for pure water is used] Electrical conductivity: 5μS/m-20mS/m
Electrical resistivity: 50Ω・m-200kΩ・m
Temperature: 0-80.0℃
Display Range:
+Electrical conductivity:
0-200.0μS/m
0-2.000mS/m
0-20.00mS/m
0-200.0mS/m
0-2.000S/m
0-20.00S/m
0-200.0S/m
+Electrical resistivity :
0.005-2.000Ω・m
0-20.00Ω・m
0-200.0Ω・m
0-2.000kΩ・m
0-20.00kΩ・m
0-200.0kΩ・m
0-2.000MΩ・m
0-20.00MΩ・m
+Salinity(NaCl): 0-4.04%
Temperature: -5-110.0℃
＊In regards to the range, the electrical conductivity/ resistivity differs according to the cell that is used.
Electrical Conductivity/Resistivity Range Switching: Auto/manual
Electrical Conductivity/ Resistivity Unit Switching: Can switch between SI Units(S/m, Ω ・ m) and the previous units (S/cm, Ω・cm).
Repeatability (Main unit):
+Electrical conductivity: ±0.5%FS
+Electrical resistivity: ±0.5%FS
+Salinity ±0.5%FS
+Temperature: ±0.2℃
Temperature compensation:
+Switch setting between Auto/Manual/None Temperature compensation method: Linear/pure water dual temperature compensation
+Reference temperature: 25℃
+Temperature coefficient: 0-9.99%(optional setting)
Calibration: Cell constant calibration
Temperature Calibration: One-point calibration
Data Memory: 1000 data points
Auto Hold Function: Provided (Stability threshold : Fixed)
Clock Function: Provided (To be shown while conducting a measurement)
Interval Memory Function: Provided (Interval: The interval can be specified between 1 sec.-99 min. 59 sec. or 2 sec.-99hr. 59 min.)
Printing Function: Can connect the external printer EPS-P30 (option)
RS-232C Interface （non-isolated）:
+Connectable Devices: PC or external printer EPS-P30 (option)
+Communication Specifications: Communication system: Start-stop synchronous method; Baud rate: 19,200 bps;
Character length: 8 bits; Parity: None; Stop bit: 1 bit
Analog Output （non-isolated）:
+Number of Outputs/Items: ch1: Number of outputs: 3 Measured value, temperature, and range (only for electrical conductivity/resistivity)
+Output Specification: Electrical conductivity/ electrical resistivity/ salinity: 0-1V FS (each range); Range: 100mV/range; Temperature: 0-1 V (0-100℃)
Waterproof Construction: IP67 (Enabled if the sensor is connected and if the external I/O portions are masked) (Can be immersed in water for 1m and 30 min.)
Performance Compensation Temperature: 0-45℃
Power Source: AA alkaline battery/nickel-hydrogen battery (2 pieces) or special AC adapter (6VA option)
Power Consumption(If 3 volt battery is used)＊2: Approx. 0.009W
Battery Life: Approx. 600hours
Outside Dimensions: Approx. 68 (w) x 35 (h) x 173 (d) mm
Mass (Including Batteries): Approx. 280g
Inluding:
+ Main unit
+ Conductivity Sensor: CT-27112B
+ Hand strap: 0TZ00006
+ AA Battery (2pcs)
+ Manual
-Tính năng:
+ Có khả năng hiển thị độ mặn (NaCl) (CM-31P)
+ Có thể đạt được kết quả có độ chính xác cao trong nước tinh khiết với chức năng bù nhiệt độ nước tinh khiết (CM-31P-W)
+ Thiết kế tiết kiệm điện; pin có thể sạc lại được
+ Thiết kế chống thấm nước (IP67, ngâm sâu 1m, tối đa 30 phút)
Phạm vi đo lường (khi sử dụng cell chuẩn):
Dải đo lường:
+ EC: 0.1mS/m-10S/m
+ ER: 0.1Ω・m-10kΩ・m
+ Độ mặn: 0-4.00%
+ Nhiệt độ: 0-80℃
Ứng dụng: Dùng để đo độ dẫn điện, điện trở, độ mặn, nhiệt độ trong phòng thí nghiệm
Datasheet
