Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Optical
Operating Wavelength(a): 1260 nm - 1625 nm
Optical Insertion Loss: ≤6.5 dB (5.0 dB Typ.) @ 1310 nm. ≤5.5 dB (4.5 dB Typ.) @ 1550 nm
Optical Return Loss : ≥40 dB
Optical Extinction Ratio (@ DC): ≥20 dB
Optical Input Power: ≤100 mW
Electrical
E/O Bandwidth (-3 dB): ≥30 GHz (35 GHz Typ.)
Operating Frequency Range : DC to 40 GHz (Min)
RF Vπ (@ 1 GHz): ≤6.0 V (5.5 V Typ.)
RF Vπ (@ 20 GHz): -
RF Vπ (@ 40 GHz): -
DC Bias Vπ (@ 1 kHz): ≤5.0 V (3.5 V Typ.)
S11: -12 dB (-10 dB Max), DC to 30 GHz. -10 dB (-8 dB Max), 30 to 40 GHz
RF Input Power: 24 dBm Maximum
Photodetector
Reverse Bias Voltage: N/A
Responsivity: N/A
Output Optical Power Monitoring Range: N/A
Mechanical
Crystal Orientation: Z-Cut
RF Connection: Female 1.85 mm (V)
Fiber Type: Input: PANDA Polarization Maintaining. Output: SMF-28®‡ Single Mode
Fiber Lead Length: 1.5 m Typ.
Environmental
Operating Case Temperature: 0 °C - 70 °C
Storage Temperature: -40 °C - 85 °C
(a) These modulators are designed for use at the specified wavelengths. Using the modulator at other wavelengths may cause an increase in the optical loss that is not covered under warranty. In some cases, this loss can be temporary; for instance, the increase in loss caused by shorter wavelengths can usually be reversed by heating the modulator to 80 °C for an hour.
(b) The LN82S-FC includes a bias circuit that couples the DC bias onto the RF drive electrode. Depending on the application, an external DC block may be needed at the RF input.
