Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Applicable sensor: No.7915-00 3-Cup type anemometer (W11)
Input signal: 30V±1V AC (no load) at 60m/s
Display: Red 7-segment LED 4 digits height: 14.2mm (upper and lower)
Display elements: Instantaneous wind speed and mean wind speed for 10 minutes
Display range: 0~99.9m/s
Sampling: approx. 1 sec. (lighting hold time)
Alarm elements: Instantaneous or mean wind speed (alarm setting range: 5~90m/s)
* Judgement condition is the mutual setting for first, second and third alarms.
Alarm output:
- First alarm:
+ Non-voltage make contact, Contact capacity: 24VDC 1A (resistance load)
+ Green LED blinking (slow)
+ Buzzer sound (slow continuant)
- Second alarm:
+ Non-voltage make contact, Contact capacity: 24VDC 1A (resistance load)
+ Yellow LED blinking (fast)
+ Buzzer sound (fast continuant)
- Third alarm:
+ Non-voltage make contact, Contact capacity: 24VDC 1A (resistance load)
+ Red LED blinking (continuous)
+ Buzzer sound (continuous sound)
Alarm reset: Contact output and LED display: When the wind speed is lower than the alarm setting value
Buzzer sound: to stop the buzzer with the button in the front panel
Operation ambient: 0 ~ 50°C, lower than 90%rh (but no condensing)
Remote distance: within approx. 2km (in use of CVVS 1.25mm2 cable)
Case: Steel plate, desk-top type (with rubber foot and tilt stand)
Power requirement: 100VAC±10%, 50/60Hz, approx. 15VA
Dimensions: approx. (W)200×(H)110×(D)200mm
Weight: ~ 3.5kg
