Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Parameters of lighting surge generator
Output voltage (open): 6kV (Max) ±5％
Frontier time: 1.2μs ±30％
Time to half-value: 50μs ±20％
Output current (short): 3kA ±5％ (max)
Frontier time: 8μs ±20％
Time to half-value: 20μs ±20％
Output polarity: Positive, negative, positive/negative
automatically
Output impedance: 2Ω±10％
Surge trigger mode: Synchronization,asynchronization
Inject phase: Freely set at 0－360°，resolution:1°
Trigger mode: Auto or manual, single
Surge times: 1-9999 times
Memories: Buit-in IEC standard or customized, 1000 groups
Surge interval: 20-9999s
Surge voltage monitoring attenuation ratio: 1000:1
Surge current monitoring attenuation ratio: 1000:1
Accuracy: Superior 5％
Peak surge voltage and current display: LCD synchronous
display
Surge voltage and current monitoring output: BNC Coaxial
terminal，≥1MΩ
Voltage and current of EUT monitoring: LCD real time
display: AC voltage and current
CDN
AC: single phase 300V，10A(16AMax), 50/60Hz
DC: 300V, 10A (16AMax)
Coupling mode
L-N
L-PE, N-PE, L+N-PE
Coupled device
L-N: 18μF capacitance
L-PE, N-PE, L+N-PE: 10Ω resistor ＋9μF capacitance
Working environment: Tempereature: 15°C－35°C,
R.H.: 10%－75%
Power supply: AC220±10％, 50/60Hz
Dimension: 470mm* 260mm* 500mm (W*H*D)
Parameters of EFT Generator
open circuit output voltage: 0.25－5kV ±5％
50Ω load output voltage: 0.125－2.5kV ±5％
Wave sharp of the pulse: 5/50ns, 50Ω/1000Ωload
Rise time
5ns ±30％, 50Ω load
5ns ±30％, 1000Ω load
duration
50ns ±30％, 50Ω load
50ns －15/+100ns, 000Ω load
Impedance: 50Ω ±20％
Output polarity: Negative/positive
Repetition frequency: 0.1－1200.0kHz ±10％
burst duration
Standard: 15ms@2.5kHz/5kHz,750μs@100kHz,250μs@300kHz
Adjustable
Nos of pulse can adjust at 1-255
Burst duration=（pulse number-1）/repetition frequency
Burst period: 100－999ms
Burst mode: Synchronous or asynchronous
Synchronous phase: Free set at 0－3600,
resolution: 10
Test function: IEC standard or set test mode freely (1000
groups)
Built-in coupling and decoupling network (3-phrase and 5
wires)
AC: 3-phrase 380V,16A, 50/60Hz
DC: 380V,16A (Max)
Coupling mode: L1,L2, L3, N,PE,freely setup
Coupling capacitors: 33nF ±10％
Environment requirements: Temperature:15°C－35°C;
Humidity: 10%－75%
Power requirements: AC220±10％,50/60Hz, 300W
EFT and Surge Generator is applied to check the performance of the power cable and inner electrical circuit of equipment (home appliances, communication electronics, electrical components, auto control system and etc.) against the high energy transient interference caused by switching and lightning transients. The equipment meet the requirements of IEC61000-4-5 and IEC61000-4-4.
Burst and surge generator is a 2 in 1 equipment, it can do both the fast transient immunity test and surge immunity test in an economic way.
