OMEGA DPI32-AL i-Series 1/32, 1/16, 1/8 DIN, Temperature/Process Meters with Alarm Outputs (Themocouple, RTD, Current, Voltage, J, K, T, E, R, S, B, C, N, L (J DIN), 4 Digit Single LED, 90 to 240 Vac)

Width: 48 mm

Height: 48 mm

Accuracy: ± 0.5 °C

RTD Type: 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385 or 0.00392

Input Type: Themocouple, RTD, Current, Voltage

Alarm modes: Band, High/Low, Latch/Unlatch, Normally Open/Closed, Process/Deviation

Form factor: 1/32 DIN

Display Size: 10.2 mm (0.40 in)

Display Type: 4 Digit Single LED

Reading Rate: 3 samples/sec

Accuracy Note: ±0.5°C temperature; 0.03% rdg

Output Detail: Alarm 1 and 2 Outputs Relay: SPDT, 250 Vac or 30 Vdc @ 3 A (resistive load)

Sampling Rate: 3 Hz (3 updates/second)

Control Output: 2 SPDT Relay

Supply Voltage: 90 to 240 Vac

Impedance Input: 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc

Number of Inputs: 1

Display Type Note: None

Enclosure Ratings: IP65, NEMA Type 4X

Relative Humidity: 90% RH non-condensing

Supply Power Note: 90 to 240 Vac ±10%, 50 to 400 Hz, 110 to 300 Vdc, equivalent voltage

Supply Power Type: AC

Thermocouple Type: J, K, T, E, R, S, B, C, N, L (J DIN)

Additional Features 1: Programmable 3 Color Display

Temperature Stability: RTD: 0.04°C/°C ;Thermocouple @ 25°C (77°F): 0.05°C/°C, cold junction compensation ;Process: 50 ppm/°C ;

Sensor/Transmitter Power: 24 Vdc @ 25 mA

Current Measurement Range: 0 to 20 mA

Voltage Measurement Range: 0 to 100 mV, 0 to 1 V, 0 to 10 Vdc

Operating Temperature, Max: 55 °C

Operating Temperature, Min: 0 °C

Thermocouple Lead Resistance, Max: 100 Ω

Datasheet