Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Width: 96 mm
Height: 48 mm
Length: 165 mm
Weight: 574 g
Accuracy: ± 0.005 %
Polarity: Unipolar/Bipolar, programmable
Setpoint: 4 isolated open collector; rated 150 mA at 1V sink, 30V open
Input Type: Universal Input Indicator
Resolution: 15-bit
Form factor: 1/8 DIN
Display Size: 13.7 mm (0.54 in)
Display Type: 6 Digit Single LED
Reading Rate: 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
Display Color: Red, Green
Output Detail: Dual 7 A relays and dual 1 A relays; Form “C”, 7 A @ 30 Vdc or 230 Vac; Isolated, tri-state, TTL/CMOS compatible; external 5V supply required for isolated; internal 5V supply for non-isolated
Sampling Rate: 13 Hz (13 updates/second)
Step Response: 1 sec to 99.9%
A/D Conversion: Dual-slope technique
Control Output: 4 SPST Relay
Data Interface: RS232
Supply Voltage: 115 Vac
Input Type Note: Thermocouple, RTD, Analog Current/Volatge, Strain
Span Adjustment: 0.00001 to 500,000 counts, programmable
Number of Inputs: 1
Cutout Dimensions: 45 x 92 mm
Display Type Note: Red or green 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
Enclosure Ratings: IP65, NEMA Type 4
Offset Adjustment: 0 to 999,999 or 0 to -99,999, programmable
Power Consumption: 10 W
Relative Humidity: 95% RH, non-condensing
Supply Power Note: 115 or 230 Vac, 49 to 400 Hz; 10 to 32 Vdc
Supply Power Type: AC
Common Mode Voltage: 1500 Vp per HV test
Data Interface Note: 300/600/1200/2400/4800/9600/ 19.2K baud; RJ11 4-wire connection; programmable to transmit current display, alarm status, min/max, actual measured input value and status
Input Configuration: Single-ended
Thermal Span Effect: ±20 ppm
Common Mode Rejection: 120 dB
Normal Mode Rejection: 60 dB
Output Configurations: Analog Current/Voltage
Power Consumption Note: 6 W nom., 10 W max
Sensor Break Protection: Up-scale or down-scale, programmable
Sensor/Transmitter Power: 10 V at 30 mA; 24V at 25 mA
Storage Temperature, Max: 85 °C
Storage Temperature, Min: -40 °C
Current Measurement Range: 0 to 20 mA, 4 to 20 mA
Voltage Measurement Range: 3 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ±50 mV, ±500 mV, ±5V, ±50V
Warm-Up to Rated Accuracy: 50 min
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
Output Configurations Note: 0 to 5V/1 to 5V/ 0 to 10V/0 to 20 mA/4 to 20 mA, user selectable; 354 Vp isolation; 15-bit resolution; 0.1% accuracy; 50 ms step response
Temperature Measurement Range: Type J: -210 to 760°C,Type K: -270 to 1372°C,Type T: -270 to 400°C,Type E: -270 to 1000°C,Type R/S: -50 to 1300°C,Type B: 100 to 1820°C,Type N: -270 to 1300°C,Type J DIN: -200 to 900°C,RTD 1: -200 to 200°C,RTD 2: -200 to 900°C,RTD 3: -200 to 850°C
