Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
CMRR: 120 dB
NMRR: 60 dB
Width: 3.78 in
Height: 1.89 in
Length: 6.5 in
Weight: 574 g
Accuracy: ± 0.005 %
Mounting: Panel
Polarity: Unipolar/Bipolar, programmable
Materials: Polycarbonate
Input Type: Single Ended, Strain
Resolution: 15-bit
Form factor: 1/8 DIN
Display Note: Red 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
Display Type: LED
Reading Rate: 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
Warm Up Time: 50 min
Output Detail: Analog Output
Output Signal: Current, Voltage
Sampling Rate: 13 Hz (13 updates/second)
Step Response: 1 s to 99.9%
Control Output: Relay
Data Interface: RS232
Supply Voltage: 115 Vac
supply-voltage: 115 Vac
Span Adjustment: 0.00001 to 500,000, programmable
Input Range Note: 0 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0 to 20 mA, 4 to 20 mA
Measurement Type: Strain
Number of Digits: 6
Number of Inputs: 1
Number of Relays: 4
SetPoint Outputs: 4 Isolated Open Collector; Rated 150 mA at 1V Sink, 30V Open
Cutout Dimensions: 1.772 x 3.622 in
Offset Adjustment: 0 to 999999 or 0 to - 99999 programmable
Power Consumption: 10 W
Relative Humidity: 95% RH non-condensing
Sensor Excitation: 10 V at 30 mA; 24V at 25 mA
Supply Power Note: 115 Vac, 49 to 400 Hz
Supply Power Type: AC
Common Mode Voltage: 1500 Vp per HV test
Data Interface Note: 300/600/1200/2400/4800/9600/ 19.2K baud; RJ11 4-wire connection; programmable to transmit current display, alarm status, min/max, actual measured input value and status
Input Configuration: Front panel buttons or via your computer
Internal Resolution: 15 bit
Power Consumption Note: 6 W Nominal, 10 W
Sensor Break Protection: Up-scale or down-scale, programmable
Storage Temperature, Max: 85 °C
Storage Temperature, Min: -40 °C
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
Analog-to-Digital Technique: Dual slope
Span Temperature Coefficient: ± 20 ppm
