Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
CMRR: 120 dB
NMRR: 60 dB
Width: 3.78 in
Height: 1.89 in
Length: 6 in
Weight: 36 g
Accuracy: ± 0.02 %
Mounting: Panel
Polarity: Automatic
Approvals: CE, EMC 2014/30/EU
Isolation: Dielectric strength to 2500V transient per 3 mm spacing based on EN 61010 for 260 Vrms or Vdc
Materials: Polycarbonate
Input Type: Voltage, Current
Protection: 240 Vrms max for voltage input ranges; 200 mA for current ranges
Form factor: 1/8 DIN
Display Note: 4-digit, 9-segment, 21 mm (0.83") red, amber or green LED (programmable)
Display Type: LED
Reading Rate: 3/sec
Warm Up Time: 30 min
Output Detail: Analog Output: 0 to 10V, 4 to 20 mA or 0 to 20 mA; can be assigned to a display range (scalable) or proportional control output with setpoint #1 when used as a control output, Relay Outputs: 2 Form "C" on/off relays. Configurable for latched and unlatched by software. (Max current: 5 AMPS, resistive load, Max voltage: 250 Vac or 30 Vdc).
Output Signal: Current, Voltage
Sampling Rate: 3 Hz (3 updates/second)
Step Response: 2 s
Control Output: Relay
Supply Voltage: 230 Vac
supply-voltage: 230 Vac
Impedance Input: 100 MΩ for 100 mV or ± 50 mV range; 1 MΩ for 10V or ± 5V range; 5 Ω for 20 mA current input
Input Range Note: 0 to 100 mV, ± 50 mV, 0 to 10V, ± 5V, 0 to 20 mA, 4 to 20 mA
Measurement Type: Current, Voltage
Number of Digits: 4
Number of Inputs: 1
Cutout Dimensions: 1.772 x 3.622 in
Power Consumption: 9.5 W
Relative Humidity: 90% @ 40°C non-condensing
Sensor Excitation: 24 Vdc @ 25 mA or 12V @ 50 mA; 10V @ 120 mA or 5V @ 60 mA
Supply Power Note: 240 Vrms overvoltage protection
Supply Power Type: AC
Internal Resolution: 15 bit
Max Error Strain/Process: ± 0.03%
Storage Temperature, Max: 85 °C
Storage Temperature, Min: -40 °C
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
Analog-to-Digital Technique: Dual slope
Span Temperature Coefficient: ± 50 ppm/°C
