Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Full Scale Range (N2 equivalent): 100 to 300 slm
Maximum Inlet Pressure MFC/MFM: 150 psig (can not exceed pressure differential requirement across MFC)
Burst Pressure: 1500 psig
Control Range: 2% to 100% of Full Scale (range on mech.)
Typical Accuracy: ±1% of set point for > 20% to 100% Full Scale
±0.25% of Full Scale for 5% to 20% Full Scale
Repeatability ±0.5% of Reading
Resolution: 0.1% of Full Scale
Temperature Coefficients:
- Zero: <0.05% of Full Scale/°C
- Span: <0.08% of Reading/°C
Inlet Pressure Coefficient: <0.03% of Reading/psi or less
Typical Controller Settling Time: 1 to 2 seconds typical above 10% Full Scale @ 50 psi
Warm-up Time: 1 hour
Operating Temperature Range (Ambient): 10°C to 50°C
Storage Humidity: 0 to 95% relative humidity, non-condensing
Storage Temperature: -20° to 65°C (-4° to 149° F)
Wetted Materials: 316L S.S. 17-7 S.S., Elgiloy®, 430FR
Seal Options: Viton®, Buna, Neoprene®, EPDM, Viton (USP Class VI Compliant)
Surface Finish MFC/MFM: 16μ inch average Ra
Weight: <4.5 lbs (2.05 kg)
Electrical Analog I/O:
- Input Power Required: +15 to +24 VDC @ (<4 watts)
- Flow Input/Output Signal: Voltage (0 to 5 VDC): 15 pin Type ‘’D’’ male
Current (4 to 20 mA): 15 pin Type ‘’D’’ male
- Compliance: CE
For specific range please check the attachment below!
