LDetek LD8001+Ar-B1-C2-D1-E1 Online Ppt/Ppb Trace Argon In Helium Analyzer (0 – 50 ppb / 0–500 ppb / 0–1000 ppb)

Detector Type: Plasma Emission Detector Design Based On A Duty Cycle Controlled System.

Integrated Oscillating Sub Ppb System.

Range: 0 – 50 Ppb/0-500 Ppb/0-1000 Ppb

Output: 4-20 mA

Serial communication: Serial Interface - Modbus RS232

Repeatability & Accuracy: < +/- 1% (Refer To Design Report)

Response Time: < 30 Seconds

Standard Features: 

Manual Or Auto-Ranging (User Selectable)

Microprocessor Controlled

Touchscreen 7 Inches HDMI TFT Display

Self Diagnosis System With Auto-Resolve Alarm

Alarm Historic

Safe Calibration Procedure To Avoid Any Bad Calibration

Digital Outputs For Remote Monitoring (All Dry Relay Contacts)

System Status (1 Output)

Range In Use (3 Output)

Calibration In Use (1 Output)

Gas Connections: 

Sample: 1/8” Face Seal Fittings

Vent: 1/8” Compression Fitting

Calibration Gas: 

Zero: Integrated In The Unit With Compact LDP1000A + LCDRY0

Span: 1000 Ppm Ar In Balance Helium

Sample Flow Requirements: 150 Sccm At 15Psig To 500Sccm At 30Psig

Sample Gas Operating Pressure: 10-30 Psig

Operating Temperature: 10°C To 45°C (Must Be Stable)

Supply:  220 VAC, 50 – 60 Hz

Power Consumption: Maximum 110 Watts

Drift/Stability: < +/- 0.01% (Refer To Design Report)

Weight: 37 Lb (17 Kg)

Enclosure Type: 3U Rackmount

Ingress Protection: IP20 In Accordance With IEC 60529

Enclosure Finish: RAL7030 Powder Coat

Certification: In Compliance With EMC Directives: IEC 61000-4-3: 2020, IEC 61000-4-6: 2013, IEC 61000-4-2: 2008, IEC 61000-4-4:  2012, IEC 61000-4-5: 2014 A1: 2017, IEC 61000-4-8: 2009, IEC 61000-4-11: 2020 For Immunity, CISPR 32: 2015 A1: 2019, FCC Part  15, Subpart B: 2021, CISPR 32: 2015 A1: 2019, FCC Part 15, Subpart B: 2021 For Emissions.

Datasheet