Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Applicable Sensors: Strain gages, Strain-gage transducers
Input Channels: 4
Synchronous Measurement: Up to 4 units by 16 channels
Applicable Gage Resistance: Quarter bridge system (2-wire or 3-wire): 120 Ω; Half and full bridge systems: 120 Ω to 1000 Ω
Input Connectors: 37-pin D-sub connector
Bridge Power Supply: AC 2 V rms
Gage Factor: 2.00 fixed
Balance Adjustment: Resistance: Within ±2% (±10000 μm/m) ; Capacity: Within 5000 pF
Balance Adjustment Methods: Resistance: Pure electronic auto balance method ; Capacity: CST method (Automatic tracking)
Nonlinearity: Within ±0.1%FS
Measurement Range: 200, 500, 1000, 2000, 5000, 10000, 20000 μm/m, 7 steps. ; Accuracy: within ±0.5%FS
Frequency Response: DC to 200 Hz; Deviation: within ±10%
Sampling: Sampling Frequencies : Max. 10 kHz (Synchronous sampling of 4 units 16 channels)
LPF:
Transfer Characteristics : 2nd order Butterworth
Cutoff Frequency : 10, 30, 100 Hz, and FLAT -4 steps
Amplitude Ratio at Cutoff Point : -3±1 dB
Attenuation : -12±1 dB/oct.
A/D Resolution: 24 bits
Holding Setting Conditions: 0.7 A or less (13 VDC)
TEDS: Loading function from the TEDS sensor (Applicable input adaptors UI-10A and UI-11A) ; CH name writing function (For the manufacture ID: KYOWA only)
Interfaces: USB2.0 (Compliant to the High-Speed, USB3.0 port supported)
Stability:
Temperature
Zero point: within ±0.2 μm/m per ºC
Sensitivity: within ±0.05%/ºC
Time
Zero point: within ±1 μm/m/8h.
Sensitivity: within ±0.3%/8h.
Withstand Voltage
Operating Temperature/Humidity: 0 to 40ºC, 20 to 85%RH (Noncondensing)
Vibration Resistant: ±29.42 m/s2 (3 G), 5 to 200 Hz, (12 cycles for each axis, 10 minutes/cycle)
Power Supply: DC 11 to 16 V; Connector: RM12BRD-4PH (Hirose)
Current Consumption: 0.7 A or less (12 VDC)
Dimensions: 210 W x 35 H x 157.5 D mm (Excluding protrusions)
Weight: Approx. 700 g