Kasuga IOH-03 Overhead ionizer
Ion generation method: DC corona discharge
Discharging electrode needle: Special alloy with low dust emission
Method of ion balance control : Control by D.I.C. circuit
Ion balance* Within ±10V (at time of factory shipment), permits fine tuning
Fan speed: Variable (non-step)
Maximum Air volume: 3.0 m3/min x 3 fan
Maximum airflow speed*: 0.87m/sec
-Alarm display:
+ Alarm lamp blinking: Cleaning alarm (control limit), high-voltage alarm
+ Alarm lamp staying lit: High-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues)
- Alarm output (External output)
+ ionization output: During ionization (high-voltage output)
+ Alarm output: While alarm lamp blinks or stays lit
External input: Permits feedback input of electrostatic potential or ion balance
Amount of ozone production*: 0.02 ppm or less
Operating environment: Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition: AC100-240V (permits series connection of up to 10 units)
Power cable: Approx. 1.8 m (power cable with grounding electrode)
Power consumption: 54VA
Mass: Approx. 5.0kg
- Control by the new D.I.C. circuit* not only maintains a certain ion balance but also ensures a consistent amount of ion generation. This allows ionization in the optimal condition at all times, with no degradation of ionization performance. Frequency of maintenance can thus be significantly reduced.
- The rear fan guard can easily be removed just by sliding it, which allows easy access to the area around the electrodes, ensuring easy maintenance.
- When the ionizer is turned on, it displays the remaining interval before the next maintenance.
- Electrode needles made of a special alloy with low dust emission allow use of the unit in a clean-room environment.
When the unit is turned on, it displays the remaining interval before the next maintenance by the number of LED lamps lit.
*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for static elimination by simultaneously controlling the ion balance and amount of ion generation.
Specifications
| Model | IOH-03 | IOH-02 | |
|---|---|---|---|
| Ion generation method | DC corona discharge | ||
| Discharging electrode needle | Special alloy with low dust emission | ||
| Method of ion balance control | Control by D.I.C. circuit | ||
| Ion balance* | Within ±10V (at time of factory shipment), permits fine tuning | ||
| Fan speed | Variable (non-step) | ||
| Maximum air volume | 3.0 m3/min × 3 fans or 2 fans | ||
| Maximum airflow speed* | 0.87m/sec | 0.70m/sec | |
| Alarm display | Alarm lamp blinking | Cleaning alarm (control limit), high-voltage alarm | |
| Alarm lamp staying lit | High-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues) | ||
| Alarm output (External output) |
ionization output | During ionization (high-voltage output) | |
| Alarm output | While alarm lamp blinks or stays lit | ||
| External input | Permits feedback input of electrostatic potential or ion balance | ||
| Amount of ozone production* | 0.02 ppm or less | ||
| Operating environment | Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation) | ||
| Input condition | AC100-240V (permits series connection of up to 10 units) | ||
| Power cable | Approx. 1.8 m (power cable with grounding electrode) | ||
| Power consumption | 54VA | 32VA | |
| Mass | Approx. 5.0kg | Approx. 3.6kg | |
*Measurement distance450mm
Ionization performance
Dimensions [mm] and names of parts
IOH-03
Intended use
- Ionization in a wide area on the workbench used in cell production process
- Ionization from objects on a conveyor
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts