JFE ARO-FT Fast optical DO sensor for integration (0 ~ 425 μmol L^-1, -3 ~ 45 °C, 2000m)

Measurement principle:

DO: Phosphorescence

Temperature: Thermistor

Range:

DO Concentration: 0 to 425 μmol L^-1. Air saturation: 0 to 200% (calibration range: 0 to 120%)

Temperature: -3 to 45 °C (calibration range: 0 to 35 °C)

Resolution:

DO: 0.01 μmol L^-1

Temperature: 0.001 °C

Initial accuracy:

DO: ±2% of measured value or ±2.0 μmol L^-1 (calibraƟon range: 3 to 30 °C)

Temperature: ±0.01 °C

Repeatability

DO

Sample-based drift: ±5% of measured value or ±5.0 μmol L^-1 / 4.000.000 samples

Pressure effect: ±2% of measured value or ±2.0 μmol L^-1

Temperature effect: ±2% of measured value or ±2.0 μmol L^-1

Response time (63%) (at 25 °C. typical)

DO < 1 s (in water)

Temperature < 1 s (in water)

Representative output parameters: DO in μmol L-1. Temperature in °C. Engineering values of DO and temperature. Number of LED emission times. etc.

Sampling interval: 1s (shorter interval at request)

Pre-heat time: 5s (shorter time at request)

Communication: RS-232C or UART (3.3 V logic)

Communication protocol: Baud rate: 38400 bps. No parity. Handshake

AD Converter: 16 bit digital conversion

Power: 6 to 26 VDC. 12 VDC recommended

Current drain (at 12 VDC. typical): Operation mode: < 30 mA. Sleep mode: < 0.1 mA

Material: Housing: Titanium (grade 2). Insulating attachment: POM

Connector: 8-pin LEMO

Dimensions:

Weight: In air: approx. 183 g (without attachment or cable)

In water: approx. 110 g (without attachment or cable)

Depth rating: 2000 m depth equivalent

Catalog