Fluke (Biomedical) Impulse 7000DP Defibrillator/Transcutaneous Pacer Analyzer

Operating temperature: 10 °C to 40 °C (50 °F to 104 °F)

Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)

Humidity: 10 % to 90 % non-condensing

Display: LCD display

Communications: USB device port for computer control

Modes of operation: Manual and remote

Power: Internal rechargeable NiMH battery pack for nine hours (typical) operation after full charge or the battery charger can operate the analyzer and charge the battery simultaneously

Battery charger: 100 V to 240 V input, 15 V/1.5 A output. For best performance, the battery charger should be connected to a properly grounded ac receptacle

Enclosure: ABS plastic housing

Dimensions (WxDxH): 32 cm x 24 cm x 13 cm (13 in x 9.5 in x 5 in)

Weight: 3.02 kg (6.6 lb, 0.1 oz)

Safety standards :

CE: IEC/EN61010-1 2nd Edition; Pollution degree 2

CAN/CSA-C22.2 No 61010-1; UL61010-1

C-Tick: Australian EMC

Electromagnetic compatibility standards (EMC): European EMC: EN61326-1

Load resistance:

Resistance: 50 Ω

Accuracy: ± 1 %, non-inductive (< 2 μH)

Pulse trigger level: 20 V

Pulse width

Range: 1 ms to 50 ms

Accuracy: ± 0.1 ms

Voltage

Range: 20 V to 5000 V

Accuracy: ± (1 % of reading + 2 V)

Current

Range: 0.4 A to 100 A

Accuracy: ± (1 % of reading + 0.1 A)

Tilt (biphasic and pulsed biphasic)

Range: 1 % to 99 %

Accuracy: ± 1 digit

Interphase delay (biphasic and pulsed biphasic)

Range: 0.1 ms to 9.9 ms

Accuracy ± 0.1 ms

Frequency (pulsed biphasic only)

Range: 2000 Hz to 8000 Hz

Accuracy: ± 1 % of reading

*For detailed specifications, please refer to the Datasheet.

Manual

Datasheet