Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
General
Dimensions (L x W x H): 314 x 233 x 124 mm/12.4" x 9.2" x 4.9"
Power Consumption: Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W
Surge Immunity on AC Power Lines: EN 50130-4
Surge Immunity on Signal Lines: EN 50130-4
Environmental
Humidity: 0-95% relative humidity
IP Rating (dust & water ingress): IP66 & IP67
Operating Temperature Range: -40°C to 70°C/-40°F to 158°F
Shock: IEC 60068-2-27
Storage Temperature Range: -50°C to 85°C/-58°F to 185°F
Vibration: IEC 60068-2-64
Measurement & Analysis
Analytics Features: Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier
Analytics Management: Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control
Measurement Accuracy: Target below 100 °C (212 °F): ± 5 °C (±9 °F) accuracy; Target below 150 °C (302 °F): ± 5% accuracy; Target above 150 °C (302 °F): ± 15% accuracy *Measured at 25°C ambient temperature. Error may be greater at extreme temperatures
Object Temperature Range: High Gain Mode: 0°C to 160°C 32°F to 320°F); Low Gain Mode: 0°C to 380°C (32°F to 716°F)
System Integration
Control Input/Output: Input: two dry alarm contacts; Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed
Ethernet: 100/1000 Mbps
External Analytics Compatible: Yes
Network APIs: NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T
Streaming Resolution:
Primary Stream: Thermal: QVGA (320 x 256) Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480 Secondary
Secondary Stream: Thermal: QVGA (320 x 256) Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480
Supported Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF
Video Over Ethernet: Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal
Thermal Camera
Array Format (Thermal): 320 x 256
Detector Pitch (Thermal): 17 µm
f number (Thermal): f/1.0
Field of View (FOV) (Thermal): 24°×18°
Image Uniformity Optimization: Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers
Spectral Range (Thermal): 7.5 µm to 13.5 µm
Thermal AGC Modes: Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting
Thermal AGC Region of Interest [ROI]: Default, Presets and User definable to insure optimal image quality on subjects of interest
Thermal Sensitivity - NETD (Thermal): <35 mK @ 25°C F# 1.0
Video Frame Rate (Thermal): NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz
Video & Recording
Composite Video NTSC or PAL: Hybrid system with IP & analog video
Local Storage: Support for SD Card (not supplied)
Visible Camera
Array Format (Visible): 4K 2160p (3840 x 2160)
f number (Visible): 1.8
Field of View (FOV) (Visible): 34°×19°
Video Frame Rate (Visible): 30 Hz or less
