FLIR EV45–T2 EV Charger Test Adapter

Measurement & Analysis

CP Error (E state) Simulation: Pass/Fault (CP signal short-circuited to PE)

CP State Simulation: A (Disconnected), B (Connected), C (Charging), D (Charging w/ ventilation), E (Error)

Input Type

Measuring Terminals: L1, L2, L3, N, PE Output for test purposes only: Max. 250 V

(Single Phase) / 430 V (3 phase), 50 / 60 Hz, CAT II 300 V, Max. 10 A

PE Error Simulation: Pass/Fault (Interruption of PE conductor)

PE Pre-Test: Pass/Fault (>50 V AC/DC between PE conductor and touch sensor)

PP State Simulation: Open, 13 A, 20 A, 32 A, 63 A

RCD/CCID Trip Test: Pass/Fault (Test RCD/CCID activation once tripped)

Voltage Phase Indication: L1, L2, L3

Communication & Data Storage

Connector: Types T2 (Built-in), Type 1 (converter included)

Output

(Optional) DM286: CP State C/D for AC Voltage with Hz measurement

(Optional) IM75-2: CP State B for EV cable Insulation Test

Power

Battery life: Approx. 100 hours, with alkaline batteries

Battery type: 4 × AA Alkaline batteries

General

Box Contents

EV45-T2

Converter for Type 1

Carrying Pouch

Test Leads

4 × AA Batteries

User Manual

Size (L x W x H): 237 mm × 65 mm × 56 mm(9.33 in × 2.56 in × 2.20 in)

Environmental & Certifications

Certifications: ETL, CE, RCM

EMC: EN61326-1

Operating Altitude: 2000 m (6560 ft)

Operating Ambient Temperature and Relative Humidity (RH): 

−10°C to 30°C (14°F to 86°F), <85% RH

30°C to 40°C (86°F to 104°F), <75% RH

40°C to 50°C (104°F to 122°F), <45% RH

Safety Category: CAT II-300 V, IEC 61010-1

Storage temperature and relative humidity [RH]: −20°C to 60°C (−4°F to 140°F), 0 to 80% RH (without batteries)

Datasheet