Elcometer CG100ABDL Corrosion Thickness Gauges (0.01~508mm, A-scan, B-scan, Thrupaint, Datalogging)

Measurement Mode: PE, PETP, EE, EEV, CT, PECT
A-Scan Display: + Rectified, - Rectified, Full Waveform (RF)
Measurement Rate:
+ 4 readings per second
+ 50 readings per second
+ 6 readings per second
Measuring Range
+ PE: 0.63 - 508mm
+ PETP: 0.63 - 508mm
+ EEV: 1.27 - 25.4mm
+ PECT: 0.63 - 508mm
+ PECT: 0.01 - 2.54mm
Calibration Options: Single, two point, velocity & material type
Measurement Accuracy: ± 1% or ±0.1mm
Measurement Resolution: 0.01 mm
Velocity Calibration Range: 1250 - 9,999m/s
B-Scan display speed: 15 seconds per screen
Datalogging: yes
Transducer Frequency Range: 1 - 10MHz
Display: 1/8 inch VGA, Display Refresh Rate 25Hz
Battery Type: 3 x AA alkaline
Battery Life: 150 hours
Operating Temperature: -10 to 60ºC
Size (w x h x d): 63.5 x 165.0 x 31.5mm
Weight (including batteries): 383g
RS232 Interface: Bi-directional
Packing List: Elcometer NDT CG100ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable

Note: A transducer is not suppied with the Gauges, must be ordered separately (below options)

Datasheet

Manual