Eijkelkamp 11.03.30 Water level meter mini - with start/stop system (10 m with start/stop system)

Applications

Geohydrological research

Water quantity research

Specifications

Battery life time: 2 years

Diameter (D) and /or size (L*W*H): Sensor D 14 mm

Maximum measuring depth: 10 m

Measured parameters: Level

Measuring principles: Conductivity

Power supply: Battery, 9 volt DC

Product material: Stainless steel, PVC, other material

Reading accuracy: 1 cm

Registration type: Manual

Rod or cable operated: Cable

Package size: 10 x 20 x 15 cm

Weight: 600 g

Description

The water level meter is part of the standard equipment for measurement of groundwater level. It is provided with a stainless steel probe with a diameter of only 14 millimetres, which is connected to a measuring tape with centimetre graduation. The probe gives clear light and sound signals when the probe comes into contact with a conductive liquid. The user can lift the cable slightly to stop the signal. The depth can then be easily read via the measuring tape. The product is accurate to approximately centimeter.

The purpose of the start/stop method of preliminary pumping is to limit the drop in water level such that the inflowing water draws many fewer soil particles into the filter pipe, which will result in much more accurate analyses. This water level meter can be connected to the Royal Eijkelkamp peristaltic pump. 

Standards and directives

• The Dutch standard NEN 5744-2011 for the sampling of groundwater

• The American standard EPA504-S95-504 low flow (minimal drawdown) groundwater sampling procedure

• The international directive ISO 5667-11: 2009 sampling of groundwater (micro-purging section).

Brochure

Manual