Chemtrol CH265 pH / Free Chlorine Digital Controller (0.1 ~ 10.0 ppm; pH: 0.0 ~ 14.0)

Free chlorine control: Adjustable from 0.1 to 10.0 ppm (mg/l) or 0.01 to 3.00 (specify)

pH control: adjustable from 0.0 to 14.0

Free chlorine sensor: Solid state electrode with 3 m cable

pH sensor: glass electrode with 3 m cable

Readouts: ppm (3 digits) and ph (2 digits) leds

Feed modes: manual, automatic, proportional

Adjustments: set-point, calibration, limits, feed rate

Indicators: leds for feed mode, feed status, alarms

4-20 ma output: out-of-range limits

Cabinet: polystyrene 22 x 18 x 10 cm

Electrical: 230v or 24 vac (specify)

Plumbing: flow cell assembly with y-strainer

Manual