Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Sensor: zirconia concentration difference cell sensor
Measure range: 0~25.00% O2
Accuracy:
0.01~99.9 ppm: ±5ppm
100~999.9ppm: ±3%FS
1000~9999 ppm: ±3%FS
1.00%~25.00%: ±3% of the measured value
Repeatability:
0.01~99.9 ppm: ±2.5ppm
100~999.9ppm: ±1.5%FS
1000~9999 ppm: ±1.5%FS
1.00%~25.00%: ±1.5% of the measured value
Stability:
0.01~99.9 ppm: ±2.5ppm/7d
100~999.9ppm: ±1.5%FS/7d
1000~9999 ppm: ±1.5%FS/7d
1.00%~25.00%: ±1.5% of the measured value/7d
Response time: T90<20s (after full preheating)
Protection level: IP64
Calibration cycle: one year (recommended)
Power supply: 24VDC
Analyzer power consumption: <15VA
Communication: RS485(standard)/RS232(optional)
Switch output: Alarm output:1 set Relay contact point capacity:24V DC,0.2A
Analog output: 1 set,4-20mA/0-20mA/0-1V/0-5V/0-10V/ 1-5V(You can set the mode freely). The load:less than 500 Ω
Environment temperature: -10~45°C Environment Humidity:<90%RH
Sample flow rate: 400~600ml/min
Sample gas pressure: atmospheric conditions±10% (Gas outlet should be atmospheric conditions)
Inlet and outlet: 1/4-inch NPT (standard 6.5 stainless steel joint)
L×W×H=375×315×179mm Level of explosion-proof:Exd || CT6 (certification)
