Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Performance:
Flow Ranges: Any full scale flow from 10 slpm to 100 slpm Nitrogen eq.,up to 200 slpm H2
Control Range: 50 - 1 with elastomeric valve seat
Repeatability: 0.25% of rate
Accuracy: 1% full scale including linearity, at calibration conditions 1.5% full scale including linearity, for flow ranges > 20 slpm
Settling Time: < 3 seconds to within 2% of full scale of final value for a 0 - 100% command step with normally closed valve
Mounting Attitude Sensitivity: ±0.5% full scale max. deviation from specified accuracy after rezeroing
Temperature Sensitivity: Zero: < ±0.075% full scale per ˚C; Span: < ±1.0% full scale shift over 10 - 50 ˚C range
Pressure Sensitivity: ±0.03% per psi up to 150 psig Nitrogen
Ratings:
Operating Pressure: 1,500 psi (10,342 MPa) max.
Differential Pressure Valve orifice sized for any pressure drop between 5 - 50 psi
(minimum pressure drop depends on gas and range - consult factory)
Ambient Temperature Limits: 41 ˚F to 149 ˚F (5 ˚C to 65 ˚C)
Leak Integrity: Inboard to outboard 1x10-10 atm. cc/sec He max.
Electrical
Electrical Connections: 15-pin D-Connector (DA-15P)
Command Input: 0 - 5 Vdc (200 k ohms input resistance)
Output Signal: Voltage Option: 0 - 5 Vdc (Max load 2 k ohms) ±0.2% Reference (max load 2 k ohms)
5 Volt Reference Output: 5 Volts. ± 0.01 Vdc into 2,000 ohms minimum
Power Requirements: ±15 Vdc (±5%) at 350 mAdc, 10.5 watts
Power Supply Sensitivity: ±0.09% full scale over total power supply voltage ±15 Vdc (±5%) at 350 mAdc 10.5 watts power consumption
EMC Directive (89/336/EEC): Per 61326
Mechanical
Process Connections:
Integrally welded to body:
Standard: 1/4" VCR® with 0.250" bore
Optional: 3/8" - 1/2" VCR
Materials of Construction: 316L VAR (Vacuum Arc Remelt), 316L, and high alloy ferritic stainless steel
External Seals: Nickel 200
Internal Seals: Nickel 200
Valve Seat: 316L, Viton® fluoroelastomers, Buna-N, Kalrez® or Teflon®
For more details, see datasheet.
