ASLI SH-60 Salt Spray Corrosion Test Chamber (108L)

Internal Dimension (mm):W600xD450xH400;

External dimension (mm):W1100xD960xH760

Material

Test chamber material :PVC board

The chamber sealed by impact-resistany acrylic board.

Saturated air barrels SUS304 stainless steel(excellent high temperature& high pressure resistant

performance)

Constant temperature control settable

(A)Salt Spray Test: NSS,ACSS

testing zone temperature : 35°C +/- 2°C

Saturated air barrels temperature : 47°C +/- 2°C

(B)Corrission resistance test:

Laboratory: 50°C +/- 2°C

Saturated air barrels: 63°C +/- 2°C

Air supply system:

Air pressure is 1 kg/cm , divided into two sections adjustment

First step is rough adjustment : 2 kg/cm2 imported type air filter with drainage function, the second step is

precision adjustment : 1 g/cm2 Pressure gauge

Spray fog method:

Adopt Knut principle to absorb brine to atomization, uniform atomization degree, to ensure continuous

testing standard.

Fog Spray quantity: adjustable type 1-2ml(ml/80cm2/h) (average quantity of 16 hours)

Heating system:

Adopting the direct heating mode, fast heating, reduce the standby time, when the temperature reaches ,the

ON/OFF switch shift automatically,temperature precision, less power consumption.

Control System:

Test Chamber temperature controller 0 ~ 99.9°C , LCD display with Dual digital display, with P.T.D automatic calculation function, temperature deviation ± 0.3°C

Saturated air barrel temperature controller 0 ~ 99.9°C , LCD display with Dual digital display, with P.I.D

automatic calculation function, error of the temperature control in ±0.3°C

timmer : 0~9990hr

Digital controller:0.1s~9990hr

air pressure range of the gauge: 0~5kg/cm2

temperature senser

electromagnetic valve

electric relay

Water system:

adopting automatic adding water supplement system, automatically added, when the water level is too low.

Safety Protection Device:

automatic power cut off supply device while water level is too low

automatic power cut off supply device for over temperature

alarm light device

Accessories:

sample Shelf/sample stick 4 pcs each

1 pc brine mixing barrel; 1 pc standard measuring cup; HP test paper

1 pc dry bulb cup

1 pc 80cm2 collector

1 pc glass spray nozzle

1 pc Wet bulb cup

1 set fog dispersal system

1 pc meter regulator

reagent Nacl 2 bottles (500 g/bottle)

1 pc Air compressor ( Optional )

Power: AC220V , single phase 3 lines; 50/60Hz; 4 mm2 copper wire

Datasheet